General Category > General Discussion
Axminster AP406WL Assembly
Turnbull:
Hello everyone. 😀
Before I assemble this lathe I was wondering, due to the combind weight of the headstock and bedways being a big challeng to lift onto the legs would it be an option to remove the inverter from inside the bedways enabling the complete separation of the headstock and bedways.
I dont want to remove any of the wiring from the terminals to do this.
Much appreciated.
Dave
Bill21:
I helped a friend set up his lathe and the head came off easily without interfering with the electrics.
Wood spinner:
If you are not able to get help / assistance
1 Block and tackle from a overhead beam ( If you have one )
2 Hire a engine crane
https://www.youtube.com/watch?v=RQlJyZyxxm0
Must be some help available ????
Turnbull:
Thanks for the suggestions guys, I will give it a go.
Cheers
Dave
Tim Pettigrew:
Talking about an improvised hoist I recently had great fun making one for lifting heavy greeen oak. The project got off the ground (excuse the pun) with unexpected help from the Middle Aisle of Lidl See my short You Tube video on this https://youtu.be/aEWJbnC1xl4 The hoist has proved useful in other ways and a similar approach might possibly help with your problem.
Tim
Navigation
[0] Message Index
[#] Next page
Go to full version