General Category > General Discussion

Nova G4 chuck insert

(1/2) > >>

Turnbull:
Hi all,
I wonder please can someone help me out on this one.
I have just changed my lathe which has a M33 x 3.5 spindle thread and my nova G3 chuck needs an insert to match. The old lathe had a 1 inch 8tpi with an insert to suit.
I dont seem to be able to find the inset I need with a M33 x 3.5

If anyone could help me out I'd be really greatful.

Ma y thanks
Dave

Tim Pettigrew:
This adaptor from Stiles & Bates might be the answer https://www.stilesandbates.co.uk/adaptor-m33x35-lathe-to-1x-8tpi-chuck-3288.php

Tim

Bill21:
It looks like they don’t make an M33 x 3.5 insert for the G3 so Tim’s suggestion may be your only option.

Turnbull:
Hello Bill and Tim and thank you for coming up with that nice little find from styles and bates. I will get one of those, saves me having to sell my current chuck buying a new one. Chuffed to bits...

May I also just check with you both, I also have 2 RP SC4s. Would I be right to say that the thread on these is  38mm x 2.0 just so I know I'm getting the right inserts for them.

Once again, many thanks

Dave.

Bill21:
I wouldn’t know what the thread for the insert is. Try contacting Record Power, they’re normally very helpful.

Navigation

[0] Message Index

[#] Next page