General Category > General Discussion

Chuck wobble

<< < (3/3)

skelly369:

--- Quote from: Valkrider on March 09, 2021, 02:49:57 PM ---It looks to me that the adapter from Rutlands is too large in diameter. Find a local machine shop to turn it down in diameter for you so that it fits inside the bearing on the headstock. It needs to be no larger in diameter that the mating surface (see attached image).

The faceplate does not seem to be the correct one for this lathe as it won't seat against that mating surface.

--- End quote ---

Brilliant idea

Navigation

[0] Message Index

[*] Previous page