General Category > General Discussion

Wood Stain?

<< < (2/5) > >>

bodrighywood:
Put a sealer on first and you effectively stop the stain soaking in and doing its job. Stain needs to go directly onto the wood ad it will react differently on different woods and different parts of the wood. If there is end grain it will soak further into the wood for example. Sycamore has little obvious difference but you will find that the stain will show up any differences in the wood dramatically. Using stain on wood is always going to be a hit and miss method of colouring.

Pete

BrianH:
I think everyone has different a idea of what constitutes 'Good' staining. None of those ideas is either right or wrong. Look out, here comes my 2pennorth for what its worth.
If, as Bill seems to describe, you are looking for a single all-over colour then paint is probably your best bet and translucency is, I'm afraid, off the menu. I really hope someone tells me this is wrong because I love collecting new ideas and techniques!
 If, on the other hand, you are just seeking a colourful addition to your turning then my suggestion is to use more than one colour, mixed, matched and applied in a variety of ways [don't let the different colours dry out between applications if you don't want 'demarcation' lines between them]. Mix colours by all means but overdoing always seems to result in a muddy colour... no idea why.
In conclusion then I believe you need a plainish timber, a collection of colours and..... far more importantly..... an open mind as to exactly what result you will land up with.
Hope that helps
Brian

Bill21:
Thanks for your thoughts folks. You have echoed my own suspicions regarding grain etc. I have seen some well executed examples of the effect I’m after so I know it’s possible with the right combination of wood and stain. I see some experimentation going forward. I will also be buying some water based stain to try.

Twisted Trees:

--- Quote from: Bill21 on June 28, 2021, 10:27:51 AM ---Thanks for your thoughts folks. You have echoed my own suspicions regarding grain etc. I have seen some well executed examples of the effect I’m after so I know it’s possible with the right combination of wood and stain. I see some experimentation going forward. I will also be buying some water based stain to try.

--- End quote ---

Personal preference but I like water based as it gives longer to work with, I am too slow for fast evaporating spirits! BUT they do behave differently on different pieces of wood if you cut your own blanks keep a few offcuts for experimenting with the colour before using it on your actual work piece.

It is against the rules to apply sanding sealer before stain, but sometimes with some woods the rules need breaking!

BrianH:
Blimey, in my last post I asked for someone to suggest a way of achieving a translucent finish with paint and here I am about to answer my own request. Now that's what I call a quick service!
About 3/4 of a yonk ago I remember experimenting with a hint of colour 'Wash' type of finish. I tried mixing Chestnut stain with meths and artists acrylic paint with water. Can't for the life of me remember the outcome but I couldn't have been that taken with results because I obviously didn't stick with the plan.
Brian

Navigation

[0] Message Index

[#] Next page

[*] Previous page