General Category > General Discussion
spindle adapter M33 x 3.5mm to 1" 10tpi
JerryRamone:
Hello Badger boy. I just came across this thread and wondered if you still have the chuck?
I have an old Arundel E5 lathe, and it’s spindle is 1” x 10tpi of I’ve measured correctly, so your chuck might be jus5 what I need. Long shot, but if you have it, please let me know, price and postage. Thanks,
Paul Hannaby:
He was last active on the forum in December 2021 so you may not get any response!
Twisted Trees:
--- Quote from: JerryRamone on April 05, 2024, 04:39:54 PM ---Hello Badger boy. I just came across this thread and wondered if you still have the chuck?
I have an old Arundel E5 lathe, and it’s spindle is 1” x 10tpi of I’ve measured correctly, so your chuck might be jus5 what I need. Long shot, but if you have it, please let me know, price and postage. Thanks,
--- End quote ---
You may find this useful https://charnwood.net/product/thread-adaptor-insert-1-x-10tpi-to-m33-x-3-5mm/
Navigation
[0] Message Index
[*] Previous page
Go to full version