Hi All, After a break of 3 years from doing any woodturning ( do to moving house and not having a workshop ) I have just made 2 hollow forms.
No 1, Spalted beech with a ebony rim. Wall thickness approx 5/6 mm. 175 mm dia X 60 mm, Hollowing hole 52 mm
No2, Burr Beech.120 mm X 65 mm, wall thickness approx 4mm with a39 mm hollowing hole
Both are finished in thinned down cellulose sanding sealer and polished in a simonize car wax which gives a nice sheen.
All comments welcome. Nigel